[root@SERVER2 ~]# iscsi-cfg manual-mode-enable
iscsi-ha now in manual mode
Note: High Availability should be disabled if any hosts will be shutdown or rebooted
[root@SERVER2 ~]# iscsi-cfg become-primary
###########################################################
# iscsi-ha is in manual mode - current status shown below #
###########################################################
Storage role:   Primary [expected primary]
Replication IP: 10.10.10.2/24 10.10.10.3/24 [10.10.10.3 expected here]
iSCSI target:   Running [expected running]