Forum
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

How create local ISO library 6 years 4 months ago #449


  • Hi.
    I want to make the local ISO library: link
    I have a working set Ha-Lizard.
    Each server has one hdd on sata.

    [root@xenserver2 etc]# fdisk -l

    WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.


    Disk /dev/sda: 500.1 GB, 500107862016 bytes
    255 heads, 63 sectors/track, 60801 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes

    Device Boot Start End Blocks Id System
    /dev/sda1 * 1 60802 488386583+ ee EFI GPT

    Disk /dev/sdb: 104.8 GB, 104854360064 bytes
    255 heads, 63 sectors/track, 12747 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes

    Disk /dev/sdb doesn't contain a valid partition table

    drbd.conf:
    device /dev/drbd1;
    disk /dev/sda3;


    I add second disk for ISO library to slave server and after reboot :
    /dev/sdb: 104.8 GB has changed /dev/sdc
    and
    second disk for ISO is /dev/sdb.

    How to give /dev/sdc for the new disk ?

Please Log in or Create an account to join the conversation.

How create local ISO library 6 years 3 months ago #452

  • Salvatore Costantino
  • Salvatore Costantino's Avatar
  • Offline
  • Posts: 703
Adding a local ISO library is outside of the scope of HA-Lizard. Try posting your question on the Citrix forum

Please Log in or Create an account to join the conversation.

How create local ISO library 6 years 3 months ago #453

Thanks for reply

Please Log in or Create an account to join the conversation.

Last edit: by Alfred.
  • Page:
  • 1