Forum

Warning: "continue" targeting switch is equivalent to "break". Did you mean to use "continue 2"? in /homepages/13/d467848118/htdocs/templates/cleanout/vertex/responsive/responsive_mobile_menu.php on line 158
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

ha-lizard.sh: unable to read itable block 11 months 3 weeks ago #3018

  • Alexhjelm2
  • Alexhjelm2's Avatar Topic Author
  • Offline
  • Posts: 4
Hi, i have some issues with my machine, it seems like HA-lizards reboots it sometimes and this has been happening since i did set it up. but now it have happend two times these last two weeks. i will attach the XCP-ng crash log here from dom0. What can be wrong? can this happen because XCP-ng drops my 10GE NIC or something?

XCP-ng 8.2

-edit- i have checked my drives and raid, no drives are marked as "F" both are "U".
Attachments:

Please Log in or Create an account to join the conversation.

Last edit: by Alexhjelm2.

ha-lizard.sh: unable to read itable block 11 months 2 weeks ago #3020

  • Salvatore Costantino
  • Salvatore Costantino's Avatar
  • Offline
  • Posts: 725
Have you checked your disk /dev/sdc? There are some disk errors in the log

Please Log in or Create an account to join the conversation.

ha-lizard.sh: unable to read itable block 11 months 2 weeks ago #3021

  • Alexhjelm2
  • Alexhjelm2's Avatar Topic Author
  • Offline
  • Posts: 4
Hi, i checked my drives and the raid seems fine
no drives are marked as "F" both are "U".

Lets say there is an error on that drive, shouldnt it still write it to the raid and why would it reboot the whole machine?

The drive is my xcp-ng system.

Please Log in or Create an account to join the conversation.

Last edit: by Alexhjelm2.
  • Page:
  • 1