TOPIC:

Hi
I have created a pool and bonded nics as per iscsi-ha 2-node cluster howto_1.4_final.pdf.

Our network is setup as follows:
NIC1 - static - 192.168.1.11/24
NIC2 - dhcp
NIC3&4 bonded
I add a gw route to NIC2 to access the Internet.
First time I run the script halizard_nosan_installer_1.4.7 it creates the bridge and reboots - all good.
After the reboot I run the script and get the errors shown in the attached image.

Is there something I have missed?

Regards

Hi

Did not attach the file, here are the errors I'm getting
The following interfaces were found on this host
inet 192.168.247.167/22 brd 192.168.247.255 scope global xenbr1
inet 192.168.1.11/24 brd 192.168.1.255 scope global xenbr0
inet 10.10.10.1/24 brd 10.10.10.255 scope global xapi0

Select replication inerface
Enter 0 for interface xenbr1
Enter 1 for interface xenbr0
Enter 2 for interface xapi0
Enter 0 - 2 for the desired Replication Interface
2
Interface xapi0 selected
Local temp folder /tmp/halizard_tmp_ found
Downloading the latest stable version of HA-Lizard to /tmp/halizard_tmp_
Downloading the latest stable version of iSCSI-HA to /tmp/halizard_tmp_
Unpacking iSCSI-HA
tar: iscsi-ha-1.5.4.tgz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
Unpacking HA-Lizard
tar: ha-lizard-1.8.7.tgz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
tar: Child returned status 2
tar: Error exit delayed from previous errors
Updating Firewall Rules
iptables: Saving firewall rules to /etc/sysconfig/iptables:[ OK ]
iptables: Flushing firewall rules: [ OK ]
iptables: Setting chains to policy ACCEPT: filter [ OK ]
iptables: Unloading modules: [ OK ]
iptables: Applying firewall rules: [ OK ]
Installing DRBD packages
./halizard_nosan_installer_1.4.7: line 746: cd: /tmp/halizard_tmp_/iscsi-ha*/RPM/3.10.0+2: No such file or directory
error: File not found by glob: drbd-utils*.rpm
Error installing drbd-utils
error reading information on service drbd: No such file or directory
Installing HA-Lizard High Availability Component
./halizard_nosan_installer_1.4.7: line 765: /tmp/halizard_tmp_/ha-lizard-1.8.7/scripts/install: No such file or directory
Installing iSCSI-HA Storage High Availability Component
./halizard_nosan_installer_1.4.7: line 772: /tmp/halizard_tmp_/iscsi-ha-1.5.4/scripts/install: No such file or directory
Installing iSCSI Target Framework

Hi

It seems the issue was caused because I was disconnected from the Internet just before running the script.
All seems to be working now.

Cheers