TOPIC:

So I setup my 2 node configuration using the NoSAN installer, and created the shared iSCSI virtual disk storage.

I just wanted to confirm if this appears correct. As well as is there a way for me to know when the storage is setup 100% so I can move my servers.

based on your picture it looks like xenserver successfully mounted the storage from both of your hosts.

You can also view live status of tgt/drbd from the CLI with:
"iscsi-cfg status"

You should see:
- TGT stopped on the slave
- DRBD secondary and connected on the slave
- TGT started on the master
- DRBD primary and connected on the master
- floating storage IP exposed on the master

At this point you should be able to build VMs and freely move them between hosts.

Awesome.

I had to create the shared storage from the XenPool > New SR > And added the Storage using the 10.10.10.3 address, and default LUN 10 provided.





It's now at 5.4 sync'ed the image is from just a bit earlier.